Lali's Bits

A graceful solution for the horror called V4's ass (and other parts)
More specific info can be found in the FAQ

Newcomers, welcome! This page is getting updated several times a day now. DAZ Users go here please.

Scroll all the way down on news on the release, compatibilities, or some issues I've already been asked about.

If the info you require is not on here, or on the FAQ or in the manual, please post it below, or send me an email with in the title "Lali Bits question" or something along those lines.

PayPal users contact Andrew from Renderotica. You can pay with PayPal if you want, there is a way. You can also contact me, then I'll forward you to Andrew.

Its going nuts in my inbox, give me time to reply too :)
Cheers!!

Go here for Lali's Bits!
Here's a copy of the manual.

Intro

On this page:

• Background
• Development of the Injection
• Release
• Troubleshooting

Background

	"OMFG! Lovely. This is going in my cart as soon as released." -Shante from Renderotica "DAYUM! Just dayum. Very impressive." - Target1 from Renderotica "'Man’s mind, once stretched by a new idea, never regains its original dimensions.' – Oliver Wendell Holmes.  Haha, very appropriate quote. I think Lali's bits are going to inspire a lot of new ideas!" - Target1 Necessity is the mother of innovation, in my opinion. When I started making the comic Weaponshandling, I was yet again confronted with the horrendous bending capabilities (or rather, lack thereof) of DAZ's Victoria 4 and decided to make a solution once and for all. I had already made a few attempts before I got myself into comics, but now the need was high for something professional and convincing. Three to four months later I had created the foundation for the "Lali System". It was named after Lali because she was the figure that I had developed it in.
	In Weaponshandling you can see the beginnings of the Lali System. The foundation has since not changed, but it has now been refined with a whole battery of interconnected master parameters that control the behaviour of target morphs relative to the movement of the legs, or simply called Joint Controlled Morphs (JCM). The Lali System currently consists of a vagina prop and four major Morphs (8 if you count the symmetry split) to account for the three key movements of the legs. One is split into 2 stages.
	Key movements are: bending 0 to100 degrees bending 100 to 135 degrees Sideways -15 to 75 degrees Side-bend replacing bending 100 or side-side 75. Beyond that there are well over one hundred morphs and master parameters to make the vagina prop open and close nicely along with the key movements.  The vagina prop itself also has over one hundred morphs, some of which are very similar.
	The vagina prop was designed according to professional anatomical books and pornographic imagery available on the internet.  Its morphs and dynamics are also based closely on these references, as well as its textures. The vagina prop is capable of replicating at least five main types of vulvas, and therein perhaps well over twenty types. I will do my best to create at least five presets to use 'out-of-the-box'. The range of possibilities thereafter are to be used at your own risk.  Lali's Bits do require a bit of studying before you can get the results you want. But I can say that... almost anything is possible.
	Up yer bum! Some time was spent on incorporating the ability of anal penetration, although priority went into the vagina. The anal capabilities an be seen in the comic The Route for now. Updates on this will be posted on this blog.
	Accessories & the Future Because of the painstaking process of preparing the injection, future injections are now less of a priority for Erogenesis. After Lali's Bits, Erogenesis will concentrate on making at least 2 Lali Lites and one full comic. Thereafter, he might consider releasing something new, also depending on the reception of Lali's Bits. No plans have been made to make any accessories available such as cum drips or body textures, but they are being taken into consideration. Lali's Bits will definitely continue being developed. One of the main items on the plan is more morphs loaded up at smaller intervals of bending for all key movements of V4's legs.  The vagina prop might be redone entirely including a more accurate internal anatomy for those lovely sickos amongst us. Development of similar solutions for V3, V5 or even M4 are currently being considered depending on the success of Lali's Bits, or the demand thereof.
	Sex! Sex! Sex! No matter how civilized you think you are, penetration, coitus or simply fucking is where the money is usually at. Here are two free examples of what you can expect in your runtime. Note the effect of the bending on the vulva area... next to none. These were rendered before The Route, however. If you want to see the most updated version, check out The Route :)

Development of the Injection

As many of you know, the making of the injection was quite the adventure... and not a recommended one. The primary reason is due to the unstable handling and complete lack of support for the CR2 (pz2) file format managed by you know who. These formats are very necessary to make anything happen in Poser, so we had no choice. Luckily through (im)patient research on behalf of Ken (Dexterward99) and myself, we managed to find a workaround to get Poser to install exactly what we wanted. In the meanwhile we've acquired quite some knowledge on the CR2 file format... 

We found that pz2 file handling has improved with the most recent updates of Poser versions.

We developed a similar method as DAZ does with their ExP system, except we expanded it to work for any V4 you want converted. Therefore the DAZ version is not too far off. 

Like mentioned on the DAZ page, in principle it should work with a Poser-created and exported V4 (no binaries) but don't risk it just yet. We've only tested it for DAZ 4.5. Wait for us to test it so then you can try it yourself if you want. Generally we'd advise you to be a little more patient until we get an official DAZ version out, tested and ready.

Release

Lali's Bits version 1.03 was released 16th February 2013. The reception was quite good, with some people running into trouble. Most of those issues were quickly resolved, but some were very persistent. Some users had serious cross-talking issues but we managed to solve it for most of them with the 1.04 update. 

Be patient with Lali's Bits. You might get a little lost at first. The manual should get you going. It has a very comprehensive chapter on getting started. I recommend you patiently just follow that, or at least read it. 

In the meanwhile I will do my utmost to update this page so help you with any common problems.

I will do my best to reply to any posts or emails but don't be surprised if I take a bit long (like a day), or in the worst case, just forget :O in that case, spam me again!!!!

Be sure to check the updates for notices that I am sick, or off to the lake, or dead etc... ;)

Troubleshooting

Sexy Chick Preset

The first issue I got was that once The Sexy Bitch Preset is put to zero, it looks quite awkward. Nothing wrong, that's just the zero setting to start from. Its the V4 mesh untouched and the pussy prop in a clear and visual position to adapt and change before tucking it away in her labia folds, for example.

Also, if your nipples look flat and extended, that means that the Sexy Chick Preset is messing with your other morphs. Dial it to zero and select your own Pussy Preset.

PS: check on Areola Fixes, one of them might still be activated. They can fuck up the nipples too.

Aiko and other FBMs

Make sure all your FBMs (like Aiko) are zero'ed so that you can first see what the V4 version looks like, then start playing with Aiko, or whatever FBM you use.

Generally, for Aiko, you'd have to adjust the vertical position of the prop. This can be done in Pussies > Action > Quick Fixes (not sure about the names). You can safely leave it there.

update: I am going to try and make an update soon to allow for automatic adjustments with popular FBMs. I don't have all of them, just the typical DAZ ones, Aiko and some of the Elite ones.

Don't ask for a date just yet cuz I just wanna make sure everyone's settled in and happy. then I'll try to get this update done.

X&M Perfect fixes:
Please read the second part of this post.

General tips

My first and formost advice with this system is: be patient!!!! Its LARGE and there are many options. 

My second advice is RTFM! :)

My third advice is: have fun!

For the rest, if you run into trouble, make sure of the following:

• update update update update your Poser!!!
• Get the 1.04 update from Renderotica (or email me)
• your V4 is initialised (run: .../runtime/libraries/!DAZ/DzCreateExPFiles-V4.bat)
• make sure all your V4 M4 related files, clothes and props are in the same runtime. I suspect that that is the root of all cross-talking.
• my folders are in the SAME runtime as DAZ is (not very necessary, but best to be safe)
• when injecting Lali's Bits, run a new scene, 
• and to be sure, clear the cache (in Preferences)
• to play it safe: inject only one figure at a time per scene
• (so once one figure is injected, save it to the library, and start a new scene)
• Use the python method to be safe, even if the direct method works. I don't have much confidence in Poser's pz2 handling that much yet.
• Never:
• re-inject after an undo of an injection
• inject twice
• get up and walk around every half an hour to avoid bloodclots in your legs or RSI in your wrists :)